Infinite Master Chief Cosplay Helmet and Cosplay Armor – DIY Print Kit

Description

Physical 3D-printed parts for the Infinite Master Chief Helmet and Armor as seen in Halo Infinite. STL designed by Galactic Armory.

Printed in durable PLA in whatever color filament I have on hand – usually black, white, or gray.

Custom Sizing Available Upon Request.

The chest clips together at the shoulders and under the arm via the modeled in clips I made to replicate the actual suit. It also has registrations between the two halves for easier assembly. There are three separate centerpieces across the sternum to both lock the halves together and help hide the seam. Should save you some cleanup time! The ab plate is a separate piece as well for better movability.

The back also has registrations and a small circular piece that pegs between the two halves. On the inside you’ll also see a hole near the top part of both halves. This is intended for a bolt/washer to provide a mechanical connection and help bear some of the weight. Your scaling will change the size of that whole obviously so you’ll need to measure it after printing to find a good fit for it.

Forearms have two points to add magnets inside the grapple/equipment mount

Hips have two spots for magnets as well so that you can attach a prop to the side of it

The back of the shin detaches and has room for 3 magnets to hold it into place. This will let you slip your foot in and out easier

Boots have several points inside to attach the top piece to the heel with elastic. For attaching the toe to the heel I recommend glueing/inserting a .5 inch EVA foam piece. That’s what I did to still allow toe movement in multiple directions. The heel has a part of it’s base hollowed out. This hole is intended to be filled with something stronger to help support your weight. I recommend either cutting down some small PVC pipe or filling it with resin.

Provided in collaboration with Coe Industries

Please allow 2 to 3 weeks processing time from when you place the order.

PLA (Polylactic Acid) is a biodegradable plastic that is very durable and long lasting. CAUTION: It is susceptible to heat and will warp if left in a hot car or direct sunlight.

This is a DIY Kit.

• DIY Kits require sanding, priming and painting.
• DIY Kits require assembly.
• DIY Kits require glue – I recommend Loctite Super Glue, liquid or gel.

Shipping

• This item is made to order and can take up to three weeks to print and ship out.
• I do not accept cancellations unless cancelled within 12 hours.
• I do not accept returns or exchanges.
• Message me if you have questions or concerns with your purchase.

Legal disclaimer

This is not an officially licensed product. This is considered FAN ART. This handmade replica is made specifically for cosplay and entertainment purposes.

Before you order

• Custom sizing: add your measurements in the order notes at checkout, or tell me you will send them later.
• Please note: this is a raw, unfinished 3D print kit that arrives unsanded and unpainted.
• Free shipping within the United States. This item ships to US addresses only.